OBIC Armor 1000

Aromatic Polyurea Coating

Typical Installations

Manhole, Wet Wells, Pump Stations, Secondary Containment, Waterproofing, Industrial Coatings, Potable Water Containment, Water Treatment, Industrial Facilities, Food Processing Plant, Bridge Decks

Product Highlights

OBIC Armor 1000 adheres extremely well to various properly prepared surfaces including metal, wood, concrete and fiber glass. Product highlights include:

  • Excellent corrosion protection and chemical resistance
  • Excellent impact resistance, even in sub-freezing weather
  • High abrasion resistance for harsh environments
  • Seamless monolithic waterproof membrane that is tough and durable
  • Odorless, 100% Solid
  • USGBC LEED, EQ Credit 4: Low-emitting VOC Compliant Materials
  • Produced in an ISO 9001-2015 certified facility

Properties of Components

Property A side B side
Viscosity 350 cps 650 cps
Gel time 11-15 seconds
Tack free time 20–30 seconds
Return to service 60 Minutes

Physical Properties

Property Value
Hardness, D-2240 D 48
Tensile strength, D-412 3315 psi
100% Modulus, D-412 1668 psi
200% Modulus, D-412 1960 psi
300% Modulus, D-412 2650 psi
Tear strength, DIE-C, D-624 417 pli
Ultimate elongation, D-412 395%
Taber Abrasion, mg loss CS17 15.0
Flexibility, 1/8” mandrel Pass

Equipment Recommendations

A Side Hose Temp 150-165 F
B Side Hose Temp 150-165 F
Spray Gun P2, GX7-DI, Fusion AP
Spray Pressure 2200 PSI (Dynamic)

Values obtained in laboratory setting for comparison purposes only and should not be considered specifications.

Surface Preparation

Surface must be clean, dry and in sound condition. Remove all oil, dust, grease, dirt, loose rust and other foreign material to ensure adequate adhesion. See the OBIC Armor 1000 Technical Data Sheet for minimum surface preparation requirements for Steel, Concrete and Masonry.

Safety

Read and review entire SDS for OBIC 1000 prior to use.

Packaging, Storage & Shelf Life

OBIC Armor 1000 is available in 55-gallon drums and 275-gallon totes. It should be stored in sealed containers between 60ºF and 90ºF. Shelf life is 12 months under normal conditions in factory sealed containers.

Click Here to CONTACT US or REQUEST A DEMO