OBIC 1601

Polyurethane Repair/Patch Material

Typical Installations

Repair/patch material for durable, seamless repair to existing containment system

Product Highlights

OBIC 1601 is a two component, 1:1 by volume, 100% solids polyurethane elastomer specifically formulated for the repair of polyurethane and polyurea elastomers. Product highlights include:

  • Rapid curing to reduce production times and improve cost efficiencies
  • Adheres tightly to the prepared surface area
  • Provides a seamless, durable patch to the existing containment system
  • Produced in an ISO 9001-2015 certified facility

Application Properties

Property Value
Gel time 4-6 minutes
Cure to touch 20 minutes
Recoat window 2 hours

Physical Properties

Property Value
Hardness, Shore A/D, D-2240 90 A / 40 D
Tensile strength, D-638 2550 psi
Elongation, D-638 350%
Tear resistance, D-624 280 pli
Taber Abrasion Resistance, D-4060 Abradant CS-17 5,000 Cycles 64.6 mg
Abrasion resistance (CS17 wheels, 1000g, 1000 cycles), D-4060 25 mg loss

Equipment Recommendations

A Side Hose Temp 150-165 F
B Side Hose Temp 150-165 F
Pump PMC PHX 40 or HXP2
Spray Pressure 2200 PSI (Dynamic)

Values obtained in laboratory setting for comparison purposes only and should not be considered specifications.


Read and review entire SDS for OBIC 1601 prior to use.

Packaging, Storage & Shelf Life

Contact OBIC for available kit sizes of OBIC 1601. It should be stored in sealed containers between 60ºF and 90ºF. Shelf life is 12 months under normal conditions in factory sealed containers.