LEAK STOP SOLUTIONS:

THE ULTIMATE CHEMICAL GROUTING
FOR INFILTRATION ISSUES

Water infiltration can cause serious structural damage and operational disruptions. OBIC’s Leak Stop Solutions offer advanced injection grouting technology to quickly seal leaks, restore integrity, and extend the life of your infrastructure—without costly replacements. OBIC provides a full range of polyurethane chemical grouts to stop leaks in water and wastewater structures by sealing cracks, deteriorated gaskets, pipe protrusions, and other groundwater entry points in brick and concrete structures.

Watch Our Leak Stop Solutions In Action!

Which Grout Is Best For Your Application?

Hydrophilic Polyurethane Grout

Hydrophilic polyurethane grout seeks out water, is absorbed into cracks and pores of the concrete and masonry, and has a tenacious bond to wet concrete. It is used to stop leaks via crack or joint injection.

Hydrophobic Grout

Hydrophobic grout repels water. Hydrophobics are not well suited for crack injection, but are excellent for curtain grouting, sealing gushing leaks, compression sealing, void filling, and soil stabilization.

OBIC 2060 MAXSEAL (PUMP-INJECTED)

View More Information

OBIC 2060 MAXSEAL (PUMP-INJECTED)

OBIC 2060 MaxSeal is a moisture activated, expanding, rigid hydrophobic polyurethane foam. OBIC 2060 MaxSeal is designed to permeate soil granules and fill large and small voids where water is leaking into structures. It withstands wet/dry cycles, permeates well and reacts quickly with water to form a dense, impermeable rigid foam.

Buy Now

OBIC 2060C MAXSEAL CONDITIONER

View More Information

OBIC 2060C MAXSEAL CONDITIONER

OBIC Grout 2060C MaxSeal Conditioner is designed exclusively for OBIC 2060 MaxSeal. 2060C is used to enable and control the reaction time of 2060 MaxSeal. Reaction time will vary between 30 seconds and 5 minutes depending on the ground temperature and amount of 2060C added. Typically, one container of 2060C conditioner is used per pail of 2060 MaxSeal.

Buy Now

OBIC 2090 MULTISEAL (PUMP-INJECTED)

View More Information

OBIC 2090 MULTISEAL (PUMP-INJECTED)

OBIC 2090 MulitSeal is a low viscosity, flexible, closed cell, hydrophilic polyurethane foam. OBIC 2090 MultiSeal is designed to be used as a crack and joint filler and is used routinely for manhole sealing and pipe penetrations.

Buy Now

OBIC 2230 HYPERSEAL (HAND-INJECTED)

View More Information

OBIC 2230 HYPERSEAL (HAND-INJECTED)

OBIC 2230 HyperSeal Grout is a water activated, flexible, hydrophilic polyurethane injection grout. HyperSeal Grout is used to repair leaks in large and small cracks in wastewater and other structures with continuous water exposure.

Buy Now

OBIC 2210 RAPIDSEAL

View More Information

OBIC 2210 RAPIDSEAL

OBIC 2210 RapidSeal is a dual-component, fast reacting hydrophobic polyurethane grout designed to stop high volume leaks in manholes, pump stations and other underground structures. The convenient cartridge package allows easy access to hard-to-reach places. The fast reaction time of the material helps to stop water quickly before the resin is washed away.

Buy Now

OBIC 2290 MULTISEAL LV (HAND-INJECTED)

View More Information

OBIC 2290 MULTISEAL LV (HAND-INJECTED)

OBIC 2290 MulitSeal LV is a low viscosity, flexible, closed cell, foam crack and joint filler used routinely for manhole sealing and pipe penetrations.

  • Designed for sealing active water leaks in cracks or joints in concrete, brick and block structures as well as plastic
  • Can withstand high water flows
  • Can absorb up to 10 times its weight in water

Buy Now

OBIC 2262 MAXSEAL (HAND-INJECTED)

View More Information

OBIC 2262 MAXSEAL (HAND-INJECTED)

OBIC 2262 MaxSeal is a dual-component moisture activated, expanding, rigid hydrophobic polyurethane foam. OBIC 2062 MaxSeal is designed to permeate soil granules and fill large and small voids where water is leaking into structures. It withstands wet/dry cycles, permeates well, and reacts quickly with water to form a dense, impermeable rigid foam

Buy Now
SHOP ALL OBIC PRODUCTS

Benefits of Using OBIC Leak Stop Solutions

  • Z

    Stops Active Infiltration On Contact
  • Z

    No Need For Major Excavation
  • Z

    Expands To Fill Cracks & Voids
  • Z

    Backed By 40-years Of Grout
  • Z

    Manufacturing Experience
  • Z

    Made In America
  • Z

    Available For Purchase To Anyone

HOW LONG DOES THE LEAK STOP PROCESS TAKE?

WATCH OUR DEMO

SEE HOW THE VILLAGE OF HAMLER USED OBIC LEAK STOP SOLUTIONS TO STOP EXTREME INFILTRATION

LEARN MORE

Need to Stop Leaks?

Talk to an Expert Today!

CONTACT US

for a product demo or call 866-636-4854
for more information.

Chief Financial Officer

KRISTI KIMPEL

With more than 16 years of experience in the trenchless technology industry, Kristi has been with OBIC since the company’s conception. In that time, Kristi has worn many hats while managing the front office: accounting, safety, marketing, event planning, insurance, and shipping and receiving, just to name a few.

Prior to joining the OBIC team, Kristi worked for a transportation broker as an onsite representative for the customers while also serving as an internal transportation specialist. She stays involved in the local manufacturing industry by maintaining active membership in the Black Swamp Safety Council. In addition, she participates in leadership positions for Williams County, learning how the community works and using it as an avenue to be more involved.

In her free time, Kristi stays busy with her two kids who are involved in a variety of extracurricular clubs and sports. She also serves as a school board member and as an archery coach where she is committed to teaching archery basics as well as important life skills. She is passionate about growing and leading women in discipleship programs and wants to positively influence others around her.

 

Physical Properties:

  • Z

    Tensile Strength: 3351 psi
  • Z

    Elongation: 395%
  • Z

    Hardness: 48D
  • Z

    Tear Resistance: 417 pli
  • Z

    SWAT ASTM G210: Pass

CEO/Chief Visionary Officer

DUSTIN SCHLACHTER

Dustin Schlachter is dedicated to providing water and wastewater system repair and maintenance solutions that are both affordable and long-lasting. With a visionary mindset, he is responsible for setting the strategic course for OBIC and ensuring high growth initiatives and strong partnerships as he leads the company toward the future.

Dustin’s entrepreneurial aspiration has held him captive to the trenchless technology field since 1999 when he and his father founded S&S Directional Boring. No stranger to change management, he has successfully led multiple companies as they embraced new infrastructure rehabilitation technologies. In 2007, Dustin founded Advanced Rehabilitation Technology where he continued to grow and expand his work to include infrastructure rehabilitation through lining and coating system applications. This expansion allowed him to strengthen the executive and visionary skills he would need one day to lead a global company.

Dustin continues to expand upon and share his knowledge of the industry by serving as a member and past president of the Great Lakes Trenchless Association. He is also an active member of the National Association of Sewer Service Companies and the Water Environment Federation.

A devoted husband and father of three, Dustin finds enjoyment and relaxation in outdoor activities like landscaping and gardening. Dustin is dedicated to learning and growing in faith, and his life goal is to help others grow as well.​

 

Marketing Manager

Lee Drugan

Lee Drugan is a seasoned Marketing Manager with over 12 years of experience, specializing in bridging the gap between complex industries and their audiences. Lee’s core passion lies in helping companies and individuals understand their ‘Why’ – which is usually a great connection between customer and the company they choose to work with.

Lee’s approach to marketing is defined by adaptability, integrity, and confidence. Understanding that change is constant and trust is essential, Lee develops marketing strategies that genuinely connect with audiences. With a Degree in Management/Marketing from Ashland University, he has expertise in adaptive strategies, digital marketing, and video/content creation, allowing him to create engaging and educational content that leaves a lasting impact.

In current roles, particularly as Marketing Manager for OBIC, Lee is responsible for all facets of marketing and advertising. Lee thrives on the challenge of highlighting the critical role of infrastructure maintenance. His marketing philosophy highlights the power of engaging and educational content, with a strong focus on brand perception and lasting results.

Outside of work, Lee finds joy in traveling with his family and creating opportunities for his kids to excel in what they love.

 

 

Member & Business Development

TROY REED

Troy is responsible for member and business development at OBIC and brings over 35 years of experience in water and wastewater infrastructure construction to the position. From fieldwork to project management, Troy’s industry experience includes a proven track record of expertly communicating a client’s objectives to the crews who are performing the work on-site. No stranger to coordinating high-priority projects, Troy ensures client satisfaction while successfully managing multiple crews of up to 130 employees who are working simultaneously on water and wastewater infrastructure projects on both residential and commercial sites.

Troy’s favorite pastimes include boating, fishing and camping, but his true passion is spending time with his three grandchildren. Although his work schedule keeps him busy, Troy and his wife enjoying finding time to rehabilitate houses.

 

Director of Corporate Training

TREY RUSSELL HESSELSCHWARDT

Before holding the Director of Corporate Training role for OBIC, Trey held various positions including Crew Leader, Project Manager, and Safety Manager at Advanced Rehabilitation Technology (ART), an OBIC certified installer.

As OBIC’s Director of Corporate Training, Trey leads the development and delivery of training programs that ensure applicators are well-versed in OBIC products, equipment, and best practices. He provides hands-on instruction in product use and maintenance, while also contributing to ongoing research and development efforts. His technical knowledge and field experience makes him a trusted resource for both internal teams and external partners, guiding customers in selecting and applying the right solutions for their needs.

Trey holds an Associate Degree in Project Management Technology and maintains several professional certifications, including BCSP Certified Health and Safety Technician, OSHA 40-Hour Certification, and Confined Space Certification. He currently serves as Treasurer for the Polyurea Development Association (PDA), where he supports the advancement of industry standards and practices.

Prior to joining ART, Trey served honorably in the U.S. Army as a Combat Medic for seven years, a background that reflects his strong sense of discipline, leadership, and service.

Outside of work, Trey enjoys spending time outdoors camping, hiking, and hunting with his wife Jamie and their two sons, Jones and Charlie. He’s also an avid sports fan and a proud supporter of the University of Michigan.

 

 

Director of Technology

BOB KLOPFENSTEIN

Bob Klopfenstein has been with OBIC since July of 2018. With over 35 years in the chemical and sewer lining coating, Bob has experience working with clients in every industry that OBIC serves. Over the past 15 years, his focus has been on offering repair and maintenance solutions for the water and wastewater structure rehabilitation industry.

Bob holds a bachelor’s degree from Bradley University and stays current on industry challenges and trends by participating in professional organizations that include the Water Environment Federation, National Association of Sewer Service Companies and North American Society for Trenchless Technology.

In his free time, Bob enjoys golfing, gardening and wine collecting.

 

Vice President of Business Development

MIKE HOFFMASTER

Mike Hoffmaster has over 38 years of experience working in the construction industry, with the last 14 spent in trenchless technology. His experience, which includes working with local construction firms and national manufacturers, makes him uniquely qualified to support and develop OBIC’s network of certified installers and to introduce OBIC products to new markets.

Mike earned his bachelor of science from Shepard University while working full-time in a precast concrete plant. He has helped to open new markets across North America and in Europe. Mike is active with numerous industry organizations, committees and serves on several Board of Directors.

Committed to giving back to his community, Mike has served as the track and field organizer for the Special Olympics for over 32 years and has volunteered with local high school athletics for 37 years. In his free time, Mike enjoys cooking, traveling and photography.